• Home
  • Brother DCP-T510W Installation Topics

Brother DCP-T510W Installation Topics

brother-dcp-t510w-installation.png

UNBOXING AND BASIC SETUP

BOX CONTENTS

  • Inbox Ink Bottles
  • Quick Setup guide
  • Product safety guide
  • Power cord
  • USB Interface cable
  • Brother Installation disk
  • Cleaning kit
  • The Brother DCP-T510W printer

Check if all the above components are available in the box.

HARDWARE INSTALLATION:

  • Remove the film covering and the protective tapes around the printer.
  • Unpack the ink tank cover from the box.
  • The Inbox ink bottles come in the following colors: black, yellow, cyan, and magenta.
  • To load paper into the paper tray, pull the paper tray completely out of the printer.
  • Open the output paper tray cover.
  • To fit the paper in the tray, gently press and slide the paper width guides and then the paper length guide.
  • Fan a stack of paper well and load it into the tray.
  • Close the output paper tray and slowly push the tray into the printer.
  • Connect the power cord to the back of the printer and an electrical outlet. Now the printer will turn on automatically.
  • After turning the machine on, you may have to select your country and language and configure all the required settings.

The hardware setup for the Brother DCP-T510W is completed.

SOFTWARE INSTALLATION:

  • Since the printer comes with an installation CD, insert the installation disc into your CD/DVD drive.
  • If your computer does not have a CD/DVD drive, download the driver from the support page.
  • Once the driver download has been completed, run the installation and wait for the connection screen to open.
  • Finally, select the type of connection you want for the printer and conclude the setup.

BROTHER DCP-T510W DRIVER FOR WINDOWS:

  • Go to the official BROTHER DCP-T510W driver webpage, and select the Downloads tab.
  • Under the OS family section, select the Windows option with its OS VERSION and click the OK button.
  • Now, to download the full driver and software package, you may need to agree to the end-user license agreement.
  • Once you click the AGREE TO THE EULA AND DOWNLOAD button, the printer driver for your computer will be downloaded immediately.
  • After completing the download, open the downloaded driver file and run it for installation.

BROTHER DCP-T510W DRIVER FOR MAC:

  • Go to the official BROTHER DCP-T510W driver webpage, and select the Downloads tab.
  • Under OS family, select the MAC option with its OS VERSION and click the OK button.
  • You may need to agree to the end-user license agreement to download the full driver and software package.
  • After selecting the AGREE TO THE EULA AND DOWNLOAD button, the printer driver for your system will be downloaded.
  • Open the downloaded driver file and run it for quick installation.

BROTHER DCP-T510W DRIVER INSTALLATION:

  • Once you run the driver file, you need to select your language and click OK to the license agreement.
  • Select the setup type you want and then click NEXT.
  • After completing the installation, connect a USB cable to your computer and the printer.
  • You can even download additional software from the same installation wizard.
  • You need to agree to the license agreement to finish the installation.

To know more about Brother DCP-T510 installation, contact our technicians.

Installation Guide