• HOW TO ACTIVATE SIMPLISAFE

How to Activate Simplisafe?

  1. You can activate your SimpliSafe system easily.
  2. Use the “email address” while purchasing the SimpliSafe system to log in to your SimpliSafe account.
  3. Click Activate from the dashboard given.
  4. You can also phone the toll-free number for the activation process.
  5. Now, the procedure for How to Activate Simplisafe process is completed.
How to Activate Simplisafe

Quick Steps for SimpliSafe Siren Activation

  1. You can include Siren to your SimpliSafe system. Instead of adding sensors to your device follow the steps provide solution for How to Activate SimpliSafe Siren.
  2. Detach the battery activation strip and slide it back to reveal the programming button. Hold the programming button and enter the PIN 3 times continuously or in a row.
  3. After the recognition of the Siren by the base station, a beep sound will be provided by the system confirming the setup.
  4. Stick the siren to the wall and make sure it is firmly placed on the wall. Press the button Home on the keypad to arm the alarm and wait for a few seconds.
  5. The Siren will now provide the entry beeps confirming that the installation is done successfully. To disarm the alarm, enter the PIN 3 times or press Off on the Keychain Remote.

How to Activate SimpliSafe Camera?

  1. Tap on the Menu icon and choose the option Cameras.
  2. Install Camera button will be visible if there are no previously installed cameras.
  3. Tap the Install Camera button to get started.
  4. If another Camera is installed already, tap the Gear icon, then Add New Camera.

How to Activate SimpliSafe Monitoring?

  1. You can activate your SimpliSafe system easily.
  2. Log in using the ’email address’ you used while purchasing the SimpliSafe system.
  3. Click Activate from the dashboard given.
  4. You can also communicate with the support agents by dialing the toll-free number for the activation process.

How to Program Simplisafe Key FOB?

  1. Navigate to the Menu option to add Devices.
  2. From the devices displayed, select the Key Fob option.
  3. Now, test the functions to know if it is working.

How to Activate SimpliSafe Sensor?

  1. You can activate your SimpliSafe system easily by following the steps below.
  2. Sign in using the email address you used while purchasing the SimpliSafe system.
  3. Click Activate from the dashboard given.
  4. You can also dial the toll-free number for the activation process.

How to Activate SimpliSafe Water Sensor?

  1. You can refer the instruction manual for reference.
  2. The button on the sensor is the test button to make sure your sensor is appropriately interfaced with the system.
  3. Place the sensor (the PRONGS should be above the water) are slightly above a place where water would come out.
  4. By placing it in that way, if there were water, the system would connect the circuit and trip the alarm.
  5. To mount the sensor another location, extend the pins by pulling them down.
  6. Mount the sensor on a wall and ensure that the pins are extended into it.
  7. You can also contact the support team by just dialing the toll-free number.

How to Activate SimpliSafe Motion Sensor?

  1. After removing the battery activation strip, place the sensor 4-5 above the floor.
  2. Do not place the sensor near any electric devices.
  3. The SimpliSafe Motion Sensor will remain active in the Away Mode.
  4. Set your system to the Home mode to avoid setting off the alarm when you are at home.
  5. The above steps expain How to Activate SimpliSafe Motion Sensor.
Installation Guide